2
2 C h a r g e r I n s t a l l a t i o n
2 Charger Installation
.......................................................................................................................................
The MinePhone is supplied with a charging block that the handset is placed within to initiate
charging.
MinePhone MP10-G2 in charging block
Correctly setting up a charger for the MinePhone requires consideration of a suitable location, and
ensuring power is correctly connected.
2.1 Positioning
The charger provided for the MinePhone is not approved for use in hazardous areas
MinePhone Chargers should be located in a well ventilated non-hazardous area, with access to a clean
Power supply. The ambient temperature should be within the range of 0 to 40 degrees Celcius.
Selecting a suitable charger position should account for the ease of physical access, and visibility of
charge indicators on the charger unit, and the handset's screen.
While handsets should slide easily into the charger, some users are likely to apply considerably more
force than required - the charger should be suitably supported to account for this.
2.2 Connectors
Due to regional differences there are several types of power connectors available for connecting the
MinePhone charger to a power source. You should confirm that you have been shipped connectors of
the appropriate voltage and type for your site prior to installation.
The power pack supplied will connect to either 110V or 240V AC power. The tail will terminate in a
2.5mm DC connector jack that fits into the charging block.
Summary of Contents for MP10-G2
Page 5: ...3 ...