manualshive.com logo in svg

Mine Site Technologies impact, User Manual, Page: 50 / 130

Share
Download
Mine Site Technologies impact User Manual Download Page 50

5.1 Logging onto the Web Browser Interface

The web browser interface has a login front screen with access at two levels:

•

ADMIN — Allows settings to be viewed and modified. The default password is ‘admin’.

•

USER — Allows settings to be viewed but not modified. By default there is no password.

Note:  Login and configuration needs to be carried out for each WAC fitted to a WNS. Each WAC
has a unique MAC address and should be configured with a unique IP address.

To log in to the web browser interface:

1. Launch your web browser and enter http://<WAC IP address> in the address field. The factory default
IP address is http://192.168.1.90 for WNS units.

2. The WNS login screen is displayed.

3. In the LOGIN dialog box, select Admin from the User Name drop-down box, and type the password
in the Password field. The factory default password is admin.

4. Click Log In. The configuration home screen is displayed.

5.2 Configuration screen

After logging on, the BASIC tab > WIRELESS RADIO screen is displayed by default as shown in

Figure 20: Default configuration screen

.

Revision A

50

Wireless Network Switch User Manual

Configuration Using the Web Interface

Summary of Contents for impact



































































































































Reviews:

No comments