Mine Site Technologies impact User Manual Download Page 4

Page: 4 / 130

4.1 Understanding Trunk and Access Ports.....................................................................................44

4.1.1 Trunk Ports.................................................................................................................44

4.1.2 Access Ports................................................................................................................44

4.1.3 Port Allocation............................................................................................................45

4.2 VLANs and Wireless Networks.................................................................................................45

4.3 Native VLAN ............................................................................................................................46

Chapter 5: Configuration Using the Web Interface ..............................49

5.1 Logging onto the Web Browser Interface..................................................................................50

5.2 Configuration screen..................................................................................................................50

5.3 Basic Tab....................................................................................................................................51

5.3.1 Setting Up the LAN....................................................................................................51

5.3.2 Configuring Wireless Radio.......................................................................................52

5.3.3 Configuring Wireless Networks.................................................................................53

5.3.4 Configuring Wireless Extensible Authentication Protocol (EAP)..............................56

5.3.5 Configuring Asset Tracking and Location Based Services........................................57

5.3.6 Configuring Ethernet Switch Ports.............................................................................59

5.4 Advanced Tab............................................................................................................................60

5.4.1 Enabling the MAC Address Filter..............................................................................60

5.4.2 Fine Tuning Wireless Performance.............................................................................62

5.4.3 Defining VLANs.........................................................................................................63

5.4.4 Configuring the VLAN Port Map...............................................................................65

5.4.5 Wireless Distribution System (WDS) settings............................................................66

5.5 Tools Tab....................................................................................................................................67

5.5.1 Configuring Administrator and User Settings............................................................68

5.5.2 Saving and Restoring Configuration Settings.............................................................69

5.5.3 Activating Power Over Ethernet.................................................................................70

5.5.4 Setting the Time..........................................................................................................71

5.5.5 Rebooting or Restoring the Network Device..............................................................73

5.5.6 Upgrading Firmware...................................................................................................74

5.6 Status Tab...................................................................................................................................76

5.6.1 Obtaining Device Information....................................................................................76

5.6.2 Wireless Client Information........................................................................................77

5.6.3 Viewing System Logs.................................................................................................78

5.6.4 Viewing Network Traffic Statistics.............................................................................80

5.6.5 Viewing Ethernet Switch Information........................................................................81

5.6.6 Viewing Tracking Information....................................................................................82

5.6.7 Viewing Recent Tag Reports.......................................................................................82

Chapter 6: Centralised Configuration Management ............................85

6.1 Overview....................................................................................................................................86

6.2 Site Configuration files..............................................................................................................86

6.3 Editing Site Configuration Files................................................................................................87

6.3.1 Network......................................................................................................................87

6.3.2 System .......................................................................................................................88

Revision A

Wireless Network Switch User Manual

Summary of Contents for impact



































































































































Search results

Summary of Contents for impact

Reviews:

Mine Site Technologies impact, User Manual, Page: 4 / 130

Search results

Summary of Contents for impact

Reviews: