29
4.
While one student holds the MultiRotor centered feed one side of the cord through the hole
in stand an loop it through a MINDS-i Beam as shown. Tie the chord off and
repeat on the other side. Make sure to pull the chord tight, a slight bowing of the test stand is desirable.
5.
With the MultiRotor strung up loop the third cord through the two open holes in either the front or rear of
the upper frame plates.
6.
Hold the MultiRotor at a 90º angle and loop the cord through the hole in the stand and tie it off.
7.
Once the MultiRotor is securely mounted to the stand you can now begin the process of calibrating your
ESC’s and verifying your PID tuning values.
Summary of Contents for UAV Mini
