P/N: H-046-007060-00 Rev 3.0
7
BeneVision TD60
Quick Reference Guide
To adjust the patient category:
1. Press
to enter the main menu.
2. Tap
Patient Info
.
3. Tap
Patient Category
to select the patient category.
4. Select
Yes
to confirm that the patient category should be changed
The selected patient category displays to the right of
Patient Category
.
5. Press
to return to the main screen.
Note:
The patient category can only be changed on the TD60.
Note:
Adjusting patient category restores the TD60 to the default (preset)
settings but does not clear patient information or data.
Note:
When the device is connected to the CMS, the patient
category at the CMS is updated if the patient category is changed
on the TD60.
STANDBY
Enter Standby
Placing a device into Standby:
•
Suspends patient monitoring.
•
Alarms are suspended.
•
Displays
Standby
on the screen.
•
The screen display automatically turns off after the device enters the
Standby mode for 30 seconds.
Note:
When connected to the CMS, and a device enters or exits Standby mode,
the CMS is also notified to enter or exit Standby mode.
To enter Standby mode:
1. Press
to enter the main menu.
2. Tap
Standby
.
3. Select
Yes
to confirm the device should enter Standby mode.
