Mindray BeneView T8, Operation Manual

Page: 117 / 290

11-1
11
Monitoring IBP
11.1 Introduction
You can measure invasive blood pressure using the MPM, or the pressure plug-in module.
The monitor can monitor up to 8 invasive blood pressures and displays the systolic, diastolic
and mean pressures and a waveform for each pressure.
1. Connector for IBP cable 2. Zero key
11.2 Safety
WARNING
z
Use only pressure transducers specified in this manual. Never reuse disposable
pressure transducers.
z
Make sure that the applied parts never come into contact with other electric
devices.
z
To reduce the hazard of burns during high-frequency surgical procedure, ensure
that the monitor’s cables and transducers never come into contact with the
high-frequency surgical units.
1
1
1
2