Mindray BeneFusion uVP, Instructions For Use Manual

Page: 51 / 62

B - 1
B
EMC and Radio Regulatory Compliance
B.1 EMC
The device meets the requirements of IEC 60601-1-2: 2020.
WARNING
•
Use of accessories, transducers and cables other than those specified or
provided by the manufacturer of this device could result in increased
electromagnetic emissions or decreased electromagnetic immunity of this
device and result in improper operation.
•
Use of this device adjacent to or stacked with other device should be avoided
because it could result in improper operation. If such use is necessary, this
device and the other device should be observed to verify that they are
operating normally.
•
Portable RF communications equipment (including peripherals such as
antenna cables and external antennas) should be used no closer than 30 cm
(12 inches) to any part of this device, including cables specified by the
manufacturer. Otherwise, degradation of the performance of this device
could result.
•
The non-ME EQUIPMENT (e.g. ITE) that is a part of an ME SYSTEM may be
disrupted by the electromagnetic interference of nearby equipment. It may
be necessary to take mitigation measures, such as re-orienting or relocating
the non-ME EQUIPMENT or shielding the location.
•
This device is intended for use in professional healthcare facility
environment only. If it is used in special environment, such as magnetic
resonance imaging environment, the device may be disrupted by the
operation of nearby equipment.