Type 2 AC EV charger Instructions-
V1.1.0
18
9.3 Charging Operation Description
9.3.1 Start Mode Instruction
➢
Start by card
：
1.
Make sure the charger is properly connected to the EV. The "green indicator light" of the charger is
always on, and the display interface shows that the plug has been plugged in.
2.
When swipe the IC card in the card swiping area, the charger starts to charge. The "green indicator"
flashes and the display interface displays the current charging data (charging voltage, charging
current, charging time, charging capacity, etc.).
3.
When users want to stop the charging, swiping the card in the card charging area needs to be carried out
for settlement.
4.
After the car is fully charged automatically, if the car has S2 switch, the charger will automatically stop
charging immediately. If the car has no S2 switch, when the charger output current is less than 1A
and last for 20min, the charger will automatically disconnect the output and stop charging. The
"green indicator" is always on.
5.
For cars with electronic lock, first needs to press the unlock button on the car to unlock the electronic
lock. After the retractable rod been withdrawn, the plug could be extracted. Otherwise the plug will
not be able to pulled out.
6.
After charging finished, disconnect the charger from the vehicle and place the plug back into the
designated position.
➢
Plug and Charge
：
1.
Make sure the charger is properly connected to the EV. The "green indicator light" of the charger is
always on, and the display interface shows that the plug has been plugged in.
2.
After the plug inserted, the charger will start charging automatically. The "green indicator" will flash
and the display interface will display the current charging data (charging voltage, charging current,
etc.).
3.
When the user wants to stop the charging, if the charging plug is equipped with a mechanical switch,
the mechanical switch can be pressed, and the charging machine will stop automatically
immediately.
4.
After the car is fully charged automatically, if the car has S2 switch, the charger will automatically stop
