Repeat the above until all transmitters are mounted.
You MUST EXIT after the last transmitter has been mounted. Press and hold Left and Right buttons
simultaneously until the 22 tires disappear and the “L” changes to “M”.
At this point you should only see the number of tire positions which have transmitters installed (
4, 6, 8, etc.
). All
other positions will have disappeared.
The monitor is now in the “Monitoring Mode (M)”. To see the system in action, you may now press the LEFT or
RIGHT button and scroll through all tire positions. You will likely have a red flashing light at the top. This will
disappear after you have set the baseline pressures to match your RV, car, truck, etc.
“Pressure Setting Mode” (P) Detailed:
From the “Monitoring Mode,”(M) press & hold the CENTER button for 5 seconds. The left front steering tire (or the
first “learned” tire) will appear.
116 psi will show if the monitor is new
or a different baseline value if a transmitter
had been learned previously. You will also see “P” on the screen.
Press LEFT or RIGHT button until your desired Baseline pressure is displayed.
Tip: Holding the LEFT or RIGHT button will make the numbers change rapidly.
22
Summary of Contents for TireMinder TM-A1A
