Multiple Alerts
A quick “overview” note here before we get to the details. When your TireMinder®
alerts you of an abnormality, do not panic or get upset. It is only doing its’ job. You
bought it to give you more information about your tires than you had before.
Sooner or later it will need to tell you something. Again don’t panic.
Most important when traveling the monitor must always be in the “M” mode. It
should always show your tire positions. The screen should never be blank.
The TireMinder® TPMS monitors tire pressure & temperature in real time (
that’s
like every 6 seconds
). To save battery power, the REGULAR pressures and
temperatures are updated on the monitor every 4 minutes if a change has
occurred. Should a significant abnormality occur, the monitor will react within 6
seconds. There are multiple levels of alerts which vary in style & intensity
depending on the severity of the abnormality. Alerts are activated whether moving
or stationary.
Above all else folks, DO NOT PANIC! Also, the DRIVER SHOULD NEVER try to figure out what the problem is. Let
your husband (
or wife
), co-pilot, navigator, partner, etc., look at the monitor and try to determine the cause of the
alert. You should both study the following icons below so you will recognize them when you are “on the road.”
14
Summary of Contents for TireMinder TM-A1A
