Mindeo MP82 Series, User Manual

Page: 31 / 102

25
characters only, i.e. in ASCII from 20H to 7EH.
Alphanumeric character only- If this option is selected, the image platform will output the alphanumeric
characters only, i.e. “A”-“Z”, “a”-“z”, “0”-“9”.
Decoder optimization: If it is enabled, the image platform will optimize the decoder with error correction.
This function is not effective for all types of barcode.
Data output delay in continue-scan mode:
If it is enabled, in the continue-scan mode, the image platform
can store the data while continue-scanning. The image platform will output the data after the predefined
delay elapsed. The maximum storage of data is 1000 characters. If this parameter is set to be “00”, the
image platform will not store data. And if the parameter is set to be “FF”, the image platform will output
data after stopping scanning.
Character encoding system: A character encoding system consists of a code that pairs each character
from a given repertoire. Common examples include Morse code, the Baudot code, the ASCII and
Unicode. If the data received does not display with the proper characters (domestic language, e.g.
Chinese), it maybe because the barcode being scanned was created using a character encoding system
that is different from the one the host program is expecting. Try alternate options to find the proper one.
Complete data output before next decode attempt: This setting is active only when USB device type is
set as “HID keyboard” or “HID keyboard for Apple Mac”, refer to chapter of “
7-7 USB interface
”. If it is
enabled, the image platform will not start next decode attempt until previous data output is completed.