27
3-8 Indication
Power on alert: After power-on the scanner will generate an alert signal to indicate a successful self-test.
LED indication: After each successful reading, the LED above the scanner will light up to indicate a good
barcode reading.
Beeper indication: After each successful reading, the scanner will beep to indicate a good barcode
reading, and its beep tone duration is adjustable.
Beep tone duration: This parameter can be adjusted for a good reading upon favorite usage.
Volume of beeper: This parameter can be adjusted for different level of the volume of the beeper.
SETUP
Option bar code
Option
Alpha. entry
Single-scan setting
Power on alert
Disable
00
Enable
01*
LED indication
Disable
00
Enable
01*
Beeper indication
Disable
00
Enable
01*
Beep tone duration
01-09 (10ms )
01-09
05*
Volume of beeper
Low
00
Middle
01
High
02*
Vibrator indication
Disable
00
Enable
01*
*
END
Summary of Contents for MD29 Series
