[3]
While the Oasis Pro
is resetting the
and
lights may
turn on. This is to
reduce the reset
time. No stimulus is
being generated.
tDCS will only run with a
good
connection rating.
If a bad connection is
detected, please adjust the
electrodes, re-wet the
sponges, or add salt to the
water to achieve a better
connection.
USING tDCS
CONNECTION TEST
When a tDCS session first starts, the OASIS Pro checks the electrical
connection by entering test mode just as it does for the CES sessions. The
graph will display one of the following codes to indicate the status of the
connection.
The tDCS session will begin automatically only when
a good connection is detected.
Open/Bad
Connection
(blinking)
Good
Connection
(solid)
If an open connection is detected during a
session, the Oasis Pro will pause the output and
wait for the electrodes to be reconnected. The
open connection error (red) will display for a
couple of seconds. The graph may scroll up and
down indicating that the unit is returning the
voltage to a safe testing level; this may take up
to 20 seconds. If a connection is not made within
two (2) minutes, the Oasis Pro will shut off.
