Minco Tel: (763) 571-3121
u
Fax: (763) 571-0927
u
www.minco.com
2
Description
Minco’s TI350 digital temperature indicator provides high accuracy and reliability in a compact
2.5” x 4.5” NEMA 4X Polycarbonate case. The TI350 loop powered indicator, accepts a 4 to 20
milliamp DC signal displaying the corresponding temperature in °C or °F.
If separate 4-20 mA transmitter is needed to drive the TI350, order a TT321 and RTD for a
single source assembly. For convenience, the TT321 transmitter can mount inside the meter’s
housing.
Wiring
Use this meter to monitor temperature anywhere from the control room to the sensing location.
Wire it into the current loop anywhere observing the +/- polarity of the loop. Remove screws,
which hold the transparent front cover in place as well as the two thumbscrews securing the
front plate to the housing. Pull power supply terminal block plug from PC board. Using a small
screwdriver, secure the appropriate wires onto block then re-plug block onto board. Follow
Figure 1
for proper wire connections
.
Figure 1
