Function Description
89
M400-020A-K6
Project Management
You can save IC P/N, data and settings to a project file for M400 control software and
you can reload all of them for next operation.
Load Project File
Load project file to software by choosing [File] -> [Load project] or clicking [Load
project] button
.
Then click [Open] button to load Project File.
Filename extension
It’s
xxxx
．
ppf
for project file.
Save as Project file
Save all the settings as a project file by choosing [File] -> [Save project] or clicking
[Save project] button
and a [Project information] dialog box will be displayed.
The current programmer operation mode, device name, data file name and check sum
value etc. will be displayed in "Project->Confirmation" dialog box.
Protection of the file in the SD
：
When the file is written into programmer, the
previously read files will be deleted if there is not enough SD memory capacity in
programmer. However, no file would be deleted if
「
Protection of the file in the SD
」
is enabled.
Please click on "OK" button after the confirmation of content.
The "Project information" dialog box will be displayed.
The procedure for operation of "Project information" dialog box screen is described as
follows.
