Minarik PCMXP Series, User Manual

Page: 16 / 43

10
Warning
Dangerous voltages exist on the drive when it is powered,
and up to 30 seconds after power is removed and the motor
stops. BE ALERT. High voltages can cause serious or fatal
injury. For your safety, use personal protective equipment
(PPE) when operating this drive.
Startup
1. Turn the speed adjust potentiometer full counterclockwise
(CCW). If the drive follows a voltage signal, set the voltage
signal to 0 VDC.
2. Apply AC line voltage.
3. Slowly advance the speed adjust potentiometer clockwise (CW).
If a voltage signal is used, slowly increase the voltage signal.
The motor slowly accelerates as either the potentiometer is
turned CW, or the voltage signal is increased. Continue until the
desired speed is reached.
Before applying power
1. Verify that no conductive material is present on the printed
circuit board.
2. Ensure that all jumpers are properly set.
Operation