4
Drive mounting
Installation
Warning
Do not install, rewire, or remove this control with power
applied.
Doing so may cause fire or serious injury. Make
sure you have read and understood the Safety Warnings on
page i before attempting installation.
m
• Drive components are sensitive to electrostatic fields. Avoid
direct contact with the circuit board. Hold drive by the chassis
only.
• Protect the drive from dirt, moisture, and accidental contact.
Provide sufficient room for access to the terminal block and
calibration trimpots.
• Mount the drive away from heat sources. Operate the drive
within the specified ambient operating temperature range.
• Prevent loose connections by avoiding excessive vibration of
the drive.