ENG
16
7.4 ADJUSTMENTS
The product is sold fully calibrated and does not require any additional adjustments.
If the product becomes unstable over time and cannot maintain its position, please contact the
Customer Support department.
7.5 TROUBLESHOOTING
Contact the Customer Support department in the following cases:
- The device does not operate.
- The product does not maintain its position.
- The light flashes.
- The light beam does not focus.
8. RECYCLING
After the useful life of the unit has come to an end, the device must be taken out of service
and properly cleaned and disinfected for subsequent recycling. For its correct disposal, please
contact an authorized recycling company.
NOTE:
Do not dispose of the product with the usual domestic waste.
Take all the disinfection and/or sterilization measures before disposing of the device
so as to not contaminate the environment.
WARNING: ELECTRICAL SHOCK
Disconnect the unit from the power source during the whole of the checking process.
7.2 LIGHTING UNIT HEAD
The following inspections/maintenance must be carried out:
1. Check for any possible anomalies, cracks, deformations in plastic pieces and seals.
2. Carry out electrical safety tests.
3. Extended operational test.
4. Damage to the paint.
7.3 REPAIRS
The following indications must be followed:
- The product may only be opened and repaired by the manufacturer. Contact the Customer
Support department if necessary.
- It is totally prohibited to modify the device in any way.
* (See Warranty Section).
