3. ASSEMBLE THE STROLLER
5
6
1. First, unfold the stroller frame
by stepping on the rear tube and
pulling the handle bar upwards.
Next, push forward until the
folding hinge is fully engaged.
The folding mechanism will lock
in place when the legs are fully
extended.
2. To attach the front wheels,
push wheel into front leg tube
until it clicks into place. Repeat
on the other side.
To remove, press release button
on the side of wheel hub and
pull wheel from hub.
Note: Pull on wheels to ensure
both of them are securely
attached to the stroller.
3. To attach the rear wheels, push
wheel into rear frame until it
clicks into place. Repeat on the
other side.
To remove, press release button
and pull wheel from hub.
Note: Pull on wheels to ensure
both of them are securely
attached to the stroller.
4. To install the seat, align the
seat with the anchors on the
sides of the stroller frame. Click
the seat into place. The seat may
be installed in either forward or
rear-facing position.
5. Insert the front bumper into
connector on the stroller frame
as shown. Pull on the front
bumper to make sure it is
attached securely.
Note: The bumper must be
securely attached before using
this product.
6. Insert the canopy clips into
the slot located on each side of
the seat.
To open canopy, push forward
while holding the rear of canopy
in place. To close, push to the
rear of stroller.
FORWARD-FACING
REAR-FACING
RELEASE BUTTON
