28
© MiMOMax 2013 Four Wire Audio
Interface Manual
The image opposite shows
the shielded HSSI cable
connected
to
the
Synchronous Serial port of
the Radio Unit.
6.4
R
ADIO
U
NIT
C
ONFIGURATION
Radio Unit configuration is achieved through the CCMS web application. At this stage the
FWA interface is unable to be configured from CCMS. For additional information regarding
Radio Unit configuration please refer to the ‘MiMOMax Radio Installation and Operation
Guide’.
On the ‘Configure Serial Interfaces’ CCMS web page the mode needs to be set to HSSI2.
CCMS Screen Capture Showing HSSI2 Selection Following The Save Action.
Having selected and applied ‘HSSI2’ the radio will query the connected interface and display
any returned information and status. An example of the information and status can be seen in
figure ‘
CCMS screen capture showing FWA interface status display
’. The Radio will also
apply any items necessary to support the connected interface. The HSSI2 mode supports
interfaces other than FWA.
