MIMAKI UJF-3042FX, Operation Manual, Page: 4 / 146

iii
Setting weight of the empty cartridge.......................3-30
Setting Key buzzer ...................................................3-31
Setting radiator pump...............................................3-32
Setting the flushing level before printing ..................3-33
CHAPTER 4 Maintenance
Routine maintenance............................................... 4-2
When this machine is left unused for a long time.......4-2
Precautions in cleaning ..............................................4-2
Cleaning exterior surfaces .........................................4-3
Cleaning the table ......................................................4-3
Ink cartridge............................................................. 4-4
Replacing with a new ink cartridge.............................4-4
Setting the ink set.......................................................4-5
Ink cartridge trouble ...................................................4-8
Shaking the white ink cartridge ..................................4-9
600ml Ink cartridge ................................................ 4-10
Registering the case weight .....................................4-10
Registering the cartridge weight...............................4-11
Registering the cartridge weight
(After LVL LOW / LVL END).....................................4-12
Avoiding dripping of ink droplet at printing............. 4-13
When the waste ink is full ...................................... 4-15
Disposing of the ink in the waste ink tank ................4-15
Disposing of the waste ink in the wiper bottle ..........4-17
Replacing the Filter................................................ 4-19
Washing the Nozzle............................................... 4-21
Wash the ink discharge passage........................... 4-23
When the Machine Is Not Used for a Long Time
(CUSTODY WASH)............................................... 4-25
Washing the Head ................................................. 4-27
Perform ink filling ................................................... 4-29
Setting nozzle face cleaning time .......................... 4-30
Regular maintenance for white ink ........................ 4-31
Cleaning of wiper................................................... 4-33
Refilling antifreeze mixed water............................. 4-35
Refilling antifreeze mixed water ...............................4-36