MIMAKI Sindoh 3DFF-222, Installation Manual

Page: 3 / 52

- 1 -
2019/06/20
Ver1.10
Installation Conditions
Please install the main unit according to the following conditions:

Operation Environment Temperature ： 16°C ~ 29°C

Operation Environment Humidity ： 20~70%Rh (with no condensation)

Place on a flat surface in an area with ample ventilation

In an area leaving at least 10cm in the rear with no obstacles

Away from direct sunlight and dust

Out of direct range of air-condition and heating air flow
Unpacking and confirming contents
1. Pull out the 4 handles ( ① ) located at the base of the box and lift upwards ( ② ).
2. Remove the upper packing ( ① ). After removing the tape, open the front
door( ② )and remove the tie wrap from the bed ( ③ ) using nippers. Finally,
remove the electrical cable located in the cartridge space.
②
①
①