18
5
Remove the used Ink IC chip.
6
Attach the ink IC chip.
• After the ink IC is inserted, the supply between the ink supply unit and the
ink supply attachment is automatically performed.
When [INK NEAR END] is displayed
Very little ink remains in the bottle. Although the print operation can continue without replacing the ink bottle, the ink
may run out during the printing operation. We recommend that you replace the ink tank with a new one soon after
this is indicated.
If you press the key in local mode, you can check the replacement tank with the local guidance.
• Replace the ink IC chip after setting a new 2L ink pack.
• Remove and attach ink IC chips in local mode.
• Store the ink IC chip that removed together with the used 2L
ink pack.
• Be careful not to mix the ink IC chip of the new 2L ink pack with
the used one.
• Automatic supply takes about 3 minutes at maximum. Other
supply operations and printing can not be performed while
automatic supply is in progress.
• Ask the industrial waste disposal company to dispose the emptied 2L ink pack.
• When removing the half-used 2L ink pack, do as follows. Otherwise, you cannot manage the remaining amount
of ink accurately.
(1) Remove the half-used 2 L ink pack from the 2L eco-case.
(2) Wipe off the ink that adhered to the inside of the connector part of the 2L ink pack using a
swab, etc.
(3) Remove the ink IC chip and store it together with 2L ink pack.
(4) When using them again, set 2L ink pack and then set the ink IC chip that kept together with
it.
Ink IC chip.
Ink IC chip.