MIMAKI JV400-130LX, Installation Manual

Page: 38 / 50

1
2
3
4
5
6
7
© 2014 MIMAKI ENGINEERING CO.,LTD. 7.1 P.2
R.1.0
INSTALLATION GUIDE > Outputting Plots > Setting at Startup
Model JV400-130/160LX
Issue 2011.02.15 Revised
F/W ver.
1.00
Remark
1.0
Rev.
7.1 Setting at Startup
 Outline
Set the language, the power supply voltage and the time difference suitable for the installation place.
 Working Procedures
1. Turn on the power supply.
2. Set the language to use.
[

] [

] :Select
[ENTER] :Register
3. Set the time difference.
[

] [

] :Change the selection item
[

] [

] :Select
[ENTER] :Register
4. Set the power supply voltage.
Select depending on the connected power supply voltage of the
machine.
[

] [

] :Select
[ENTER] :Register
The setting value is as below:
Area of 100V : ” 100V ”
Area of 110~120V : “ 110V and over ”
Area of 220V : “ 220V “
Area of 230~240V : “ 230V and over “
5. Terminate with [ENTER].
(When you press [END], the screen returns to the previous one.)
BOOT
JV400 Start-up
ver 1.00R0
PLEASE WAIT
INITIALIZE MOTOR
Power On
PLEASE WAIT
SEARCHING ORIGIN
LANGUAGE
:English
ﾆﾎﾝｺﾞ
TIME SET
2011.10.05 21:36:00
PWRSPLY.VOLTAGE
:100V
110V and over
220V
230V and over
If you do not set the proper voltage, it may cause
damage.
INITIAL SETTING
COMPLETED [ENT]