Mimaki Europe B.V.
Sign Graphics Products
FAQ 2
58
#
Questions
Answers
10
Are the cutting accuracy and the throughput of CJV150/300
and CJV30 equivalent?
CJV150/300 cutting accuracy is equivalent or better.
Throughput depends on cutting data
11
How can I print Mimaki Metallic Color Collection?
The Metallic Color Collections are stored in a folder of RL6.
Please open the file from the folder and print.
12
When printing metallic color, different media profiles can be
used for silver plate and color plate, if the resolution and
pass count are the same. (This was not possible before.)
Is this also the same when using white ink?
Yes, it is. When composing color plate and white plate, different
media profiles can be selected for each. But please select the same
profile for both color plate and white plate for better print quality.
13
From CJV150/300, media width is detected not by the
position of the pinch rollers, but by the actual media width.
Is it then possible to cut media outside of the pinch rollers
at both sides?
Yes, it is possible.
14
The adjustment of CJV30's P&C positioning accuracy is
difficult, while Roland has the simple adjustment method.
How is the CJV150 and CJV300?
Please print a special pattern from RL6 to adjust print & cut position.
15
Can the setting of P&C positioning accuracy be registered as
"Favourite"?
No, it cannot.
16
Can the pinch roller which is positioned out of media be
turned off automatically?
Yes, it can.
17
Should the Pen-line sponge be used when performing
dotted-line cut?
Dotted-line cut can be performed by using Pen-line rubber. However,
to prevent the blade from abrasion, it is recommended to use the
optional Pen-line sponge
