background image

Introduction

3

Introduction

Using the Windows plotter driver allows vector data to be extracted from data printed using an application and 
then output to a plotter.

Precautions

It is strictly prohibited to write or copy a part or whole of this document without our approval.

Every effort has been taken to ensure the accuracy of this document, but if any errors are discovered,
please contact your local distributor or our sales office.

The contents of this document may be subject to change without notice.

Copying the MIMAKI ENGINEERING CO., LTD. Software described in this document to another disk
(except for backup) and loading the software to memory for purposes other than running it are strictly
prohibited.

Note that some of the information provided in this document may differ from actual specifications, due to
improvements in or changes to software.

MIMAKI ENGINEERING CO., LTD. does not assume any liability against damages (including but not
limited to the loss of profit, indirect damage, special damage or other monetary damages) arising from
the use or inoperability of this product except as stipulated by the warranty provisions of MIMAKI ENGI-
NEERING CO., LTD. The same shall also apply even if MIMAKI ENGINEERING CO., LTD. had been
notified of the possibility of damages in advance. For example, we shall not be liable for any loss of
media that is created using this product or indirect damages caused by products made using this media.

The latest issue of this document can be downloaded from our official site.

Please Read Before Using the Plotter Driver

Before using the plotter driver, click [ReadMeFirst] on the CG-AR 
plotter driver installation screen to confirm compatible machines, 
compatible applications, and precautions.

 Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the United 
States and other countries.
Other company and product names mentioned herein are the trademarks or registered trademarks of the 
respective companies in Japan and in other countries.

©

2021 MIMAKI ENGINEERING CO., LTD. All rights reserved.

Summary of Contents for CG-AR

























Reviews: