24
Loading a sheet of media
Sheet detection
The width and length of the sheet are detected by pressing
or
key depending
on the sheet loaded. (
P.25)
• Once the sheet length has been detected, if the received data is larger than the sheet, the
portion of data that exceeds the sheet cannot be used for cutting.
If the sheet length is not detected, the plotter will terminate cutting operation when data goes
beyond the sheet.
• If the sheet sensor function is set to [OFF], a press of a jog key
will make
the plotter perform the same sheet detection as the case
key is pressed. (Only the
sheet width is detected.)
• The maximum length that can be detected at the
front and rear ends of the sheet of media is 3 m.
END
END
Origin after
detection
3 m maximum
When the tail end of
the sheet is detected
Summary of Contents for CG-100SR2
Page 1: ...D202007 14 MIMAKI ENGINEERING CO LTD URL http www mimaki co jp...
Page 65: ......
Page 66: ......
Page 67: ...D202007 14 30112011...