MIMAKI CF3-1610, Operation Manual

Page: 94 / 166

3-4
Cutting the Same Data Again (Copy)
Previously cut data can be cut again in offline status.
This eliminates the need to send the same data many times from the PC.
1
Clear the data ( P.2-34).
• Clear the data immediately before receiving the data to copy.
2
Cut the data to copy ( P.2-32).
3
Press to select local status.
4
Press a jog key to move the origin ( P.2-31).
• Reset the origin to the position to be copied. Failure to
reset the origin results in cutting at the same position.
5
Press to display the second
page of the local menu.
6
Press and select [SINGLE COPY].
7
Press to copy the data.
• Press to cancel the copy.
• When copying is complete, the display reverts to the
screen at Step 5 after the head retraction.
• To cut once more, repeat the procedure from Step 4.
• Use DATA CLEAR to clear ( P.2-34) the receive buffer before receiving the data to be copied. If the
data is not cleared, the other data in the receive buffer will be copied.
[ LOCA L ] 1 / 5
TOOL SE L ECT - - - >
COND I T I O N - - - >
T ES T CUT - - - >
[ LOCA L ] 2 / 5
DATA CL EAR - - - >
S I NGL E COPY - - - >
V I EW
- - - >
<COPY > 1 / 1
END KEY t o START
CE KEY t o CANCE L
[ LOCA L ] 2 / 5
DATA CL EAR - - - >
S I NGL E COPY - - - >
V I EW
- - - >