MIMAKI CF3-1610, Operation Manual

Page: 90 / 166

Cutting (Drawing)
2-34
Interrupting Processing (Data Clear)
In the following cases, clear the received data from the receive buffer.
(1) To clear an interrupted cutting (drawing) file from the receive buffer, without restarting processing.
(2) To clear received but unprocessed data from the receive buffer.
(3) To clear data remaining in the receive buffer before receiving data from running the SINGLE COPY function.
(4) To cut using a PC that is different from the PC that sent the cutting data the previous time.
1
Set local status.
• If the unit is in remote status, press to set
local status.
• Press during data processing to interrupt
the processing.
2
Display the second page of the local
menu.
• Press several times.
3
Press .
[DATA CLEAR] is selected.
4
Press .
• The data is cleared.
• Press
to cancel the data clear. Return to Step 2.
[ LOCA L ] 1 / 5
TOOL SE L ECT - - - >
COND I T I O N - - - >
T ES T CUT - - - >
[ LOCA L ] 2 / 5
DAT A C L EAR - - - >
S I NGL E COPY - - - >
V I EW
- - - >
<DA T A C L EAR>
END KEY t o S T ART
CE KEY t o CANCE L
ORGk e y t o SC . CL R