background image

1

WARNING!

 If used incorrectly the machine can cause injury. 

Please read the Operator’s Manual thoroughly making sure you understand how to use the machine

before use. Always wear personal protective equipment such as gloves, eye protection, hearing

protection, and a hard hat. Jobsites might require certain protective equipment be used due to

national and local regulations and insurance policies. Make sure you check with the jobsite foreman

for requirements before work begins. 

 

Dear Customer, 

Welcome to the Rattle Stick Concrete Tools family, our
intent to deliver the best products as possible. Delivering
innovative, well-built, ergonomic, cost-effective products
is our goal to help you do the best job possible. Safety,
and innovation are our cornerstone of design
This Operator’s Manual is a valuable document. Make
sure it is always accessible when using the machine. If
you lend or sell this machine, make sure that this
document is also transferred, so the new user will know
how to effectively use and maintain it. 

User Responsibility 

It is the owner’s / employer’s responsibility to ensure that
the operator is trained and has sufficient knowledge
about how to use this machine safely. Supervisors and
operators must read and understand the Operators
Manual. They must be aware of the safety instructions,
limitations, proper use and maintenance. Local and
national legislation may regulate the use of this machine.
Find out what legislations are applicable in your location
before use. 

Summary of Contents for Rattle Stick












Reviews: