Milwaukee PFH 26, Original Instructions Manual

Page: 17 / 20

17 ENGLISH
EC-DECLARATION OF CONFORMITY
Winnenden, 2011-11-14
Rainer Kumpf
Manager Product Development
Authorized to compile the technical
fi le
MAINS CONNECTION
Connect only to single-phase a.c. current and only to the
system voltage indicated on the rating plate. It is also
possible to connect to sockets without an earthing contact
as the design conforms to safety class II.
MAINTENANCE
SYMBOLS
Please read the instructions carefully before
starting the machine.
Accessory - Not included in standard
equipment, available as an accessory.
Do not dispose of electric tools together
with household waste material! In
observance of European Directive 2002/96/
EC on waste electrical and electronic
equipment and its implementation in
accordance with national law, electric tools
that have reached the end of their life must
be collected separately and returned to an
environmentally compatible recycling
facility.
Class II construction, tool in which
protection against electric shock does not
rely on basic insulation only, but in which
additional safety precautions, such as
double insulation or reinforced insulation,
are provided.
289 776 - PH26.indd 17 289 776 - PH26.indd 17 14.11.2011 14:52:41 14.11.2011 14:52:41
The ventilation slots of the machine must be kept clear at all
times.
Important note! If the carbon brushes are worn, in addition to
exchanging the brushes the tool should be sent to after-sales
service. This will ensure long service life and top
performance.
Use only Milwaukee spare parts. Should components need
to be replaced which have not been described, please
contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the Article No. as well as the machine type
printed on the label and order the drawing at your local
service agents or directly from Milwaukee Australia (Toll
Free Telephone Number 1300 361 505 Email
Milwaukee@ttibrands.com.au) or Milwaukee New Zealand
(Toll Free Telephone Number 0800 279 624 Email
Milwaukee@ttibrands.co.nz).
Always disconnect the plug from the power
supply socket before carrying out any
maintenance work on the machine.
We declare under our sole responsibility that this product is in
conformity with the following standards or standardized documents.
EN55014-1:2006+A1:2009+A2:2011, EN55014-2:1997+A2:2008,
EN61000-3-2:2006+A1:2009+A2:2009, EN61000-3-3:2008,
EN60745-1: 2009+A11:2010, EN60745-2-6:2010, 2011/65/EU,
2006/42/EC, 2004/108/EC