Milwaukee PD2E 22 R, Original Instructions Manual

Page: 16 / 32

Always disconnect the plug from the socket before
carrying out any work on the machine.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine.
Always lead the cable away behind you.
Do not use diamond core drills on hammer mode.
When working in walls ceiling, or floor, take care to avoid
electric cables and gas or waterpipes.
SPECIFIED CONDITIONS OF USE
The electronic drill/screwdriver can be universally used
for drilling, percussion drilling, screwdriving and cutting
screw threads.
Do not use this product in any other way as stated for
normal use.
MAINS CONNECTION
Connect only to single-phase AC current and only
to the system voltage indicated on the rating plate. It is
also possible to connect to sockets without an earthing
contact as the design conforms to safety class II.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in conformity with the following standards or
standardized documents. EN 60745, EN 55014-1, EN
55014-2, EN 61000-3-2, EN 61000-3-3, in accordance
with the regulations 2006/42/EC, 2004/108/EC
MAINTENANCE
The ventilation slots of the machine must be kept clear
at all times. If the machine is mainly used for percussion
drilling, regularly remove collected dust from the chuck.
To remove the dust hold the machine with the chuck
facing down vertically, and completely open and close
the chuck. The collected dust will fall from the chuck. It is
recommended to regularly use cleaner (Id.No. 4932 6217
19) for the clamping jaws and the clamping jaw borings.
Use only Milwaukee accessories and Milwaukee spare
parts. Should components need to be replaced which
have not been described, please contact one of our
Milwaukee service agents (see our list of guarantee/
service addresses).
If needed, an exploded view of the tool can be ordered.
Please state the Article No. as well as the machine type
printed on the label and order the drawing at your local
service agents or directly at:
Milwaukee Electric-Tools, Max-Eyth-Straße 10, D-71364
Winnenden, Germany.
GB
16
English
SYMBOLS
Please read the instructions carefully before
starting the machine.
CAUTION! WARNING! DANGER!
Always disconnect the plug from the
socket before carrying out any work on the
machine.
Accessory - Not included in standard
equipment, available as an accessory.
Do not dispose of electric tools together
with household waste material! In
observance of European Directive
2002/96/EC on waste electrical and
electronic equipment and its implementation
in accordance with national law, electric
tools that have reached the end of their life
must be collected separately and returned
to an environmentally compatible recycling
facility. SY
Rainer Kumpf
Director Product Development
Authorized to compile the technical file
Winnenden, 2011-11-15
PD2E 22R-5L_12-01-2012.indd 16 02/02/2012 10:01 AM