ADDITIONAL BATTERY SAFETY RULES
WARNING
To reduce the risk of fire,
personal injury, and product
damage due to a short circuit, never immerse your
tool, battery pack or charger in fluid or allow a fluid
to flow inside them. Corrosive or conductive fluids,
such as seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can
cause a short circuit.
WARNING
Do not charge
non-rechargeable batteries.
FUNCTIONAL DESCRIPTION
1
2
4
7
9
14
13
12
15
16
17
18
3
8
5
6
11. Water supply valve
13. ONE-KEY
™
indicator
14. Overheat indicator
15. Spindle bolt
16. Roller wheels
17. Scrench/storage
18. Hex wrench
1. Trigger
2. Rear handle
3. Trigger lock
4. Arm button
5. Battery latch lever
6. Battery latch lock
7. Front handle
8. Water supply tube
9. Wheel guard handle
10. Spindle lock access hole
10
11
5
ASSEMBLY
WARNING
Recharge only with the charger
-
manual supplied with your charger and battery.
Removing/Inserting the Battery
To
remove
the battery, push the battery latch to the
side and squeeze the battery latch lever. Pull the
battery pack away from the machine.
WARNING
Always remove battery pack before
changing or removing accessories.
To
insert
the battery, slide the pack into the body of
the machine. Make sure it latches securely into place.
WARNING
recommended for this machine.
Others may be hazardous.
WARNING
To reduce the risk of injury, use a
maximum safe operating speed at least 5370 RPM.
READ SAFETY INFORMATION SUPPLIED WITH
CUT-OFF WHEEL. Always wear proper safety
equipment, including a dust mask.
1. To
install
3. Move wheel guard for easier access to spindle bolt.
arbor adapter matches the wheel arbor hole size
(20 mm or 25.4 mm).
Bolt
Spindle
Arbor adapter
Wheel
5. While holding the spindle lock in place with the
hex wrench (1), install and tighten the spindle bolt
securely with the scrench (2).
1
2
6. To
remove
in place and loosen the spindle bolt with the