LOGGING (MW151)
37
USB
Logged data can be transferred to a USB flash drive.
1. Insert a USB flash drive into the USB port located on the top of the meter.
2. Press RCL.
3. Use the RANGE/
to select the “EXPORT ALL” option then press GLP/ACCEPT to
confirm. The meter will display the percentage of export.
pHmV
NO MTC ATC
USB
OPEN
AUTO
HOLD
SLOPE
CLEAR
CAL
1.68
4.01
6.86
7.01
9.18
10.01
12.45
CUST1
CUST2
DATE
ACCEPT
ºC
ºF
pH
mV
TIME
pHmV
NO MTC ATC
USB
OPEN
AUTO
HOLD
SLOPE
CLEAR
CAL
1.68
4.01
6.86
7.01
9.18
10.01
12.45
CUST1
CUST2
DATE
ACCEPT
ºC
ºF
pH
mV
TIME
When the export is finished, the USB flash drive can be removed.
Note:
Do not remove USB flash drive during an active export transfer.
When the battery is low, the “BATTERY LOW” message is displayed blinking and the export
is not executed.
When the flash drive is missing or not inserted properly, the “NO MEMSTICK“ message is
displayed.
When identically named lots have already been exported to USB, the “OVR.“ message
appears with the overwritten lot number blinking. Use the
keys to scroll between
“YES”, “NO”, “YES ALL”, “NO ALL” options. Press GLP/ACCEPT to confirm.
