4
OPERATION
WARNING
Always remove battery pack before
•
changing or removing accesso-
-
mended for this tool. Others may be hazardous.
To reduce the risk of injury, always wear safety
goggles or glasses with side shields.
Pressing
•
•
Inspect and discard workpieces with cracks or wear
before use. Materials may crack or shatter.
4.
5.
6.
1. Turn the tool
ON
by quickly pressing and releasing
the start button.
2. Open the jaws and
place around the
3. Hold tool securely.
Press and hold the
start button. The
green LED will go
out.
7.
T h e a u t o m a t i c
press cycle be-
gins. Release the
start button and
continue to hold
the tool securely.
When the press
cycle is complete
the tool will switch
LED will light.
ASSEMBLY
To cancel the auto-
matic press cycle,
press and hold the
release button. Hold tool securely until jaws open
If the tool is in use for 30 minutes continuously
cool down for at least 15 minutes before continu-
ing. Under normal use (e.g., plumbing/mechanical)
press freely and pay attention to the LED indicators
(see "Troubleshooting").
8.
9.
-
WARNING
Recharge only with the charger
manual supplied with your charger and battery.
Removing/Inserting the Battery
To
remove
the battery, push in the release buttons
and pull the battery pack away from the tool.
changing or removing accessories.
WARNING
Always remove battery pack before
1. Pull out the retaining pin (1).
2. Insert the press jaw (2).
3. Push in the retaining pin (3).
To
insert
the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
reco
Only use
mmended
accessorie
for thi
s
s tool. Others
may be hazardous.
Inserting/Removing the Press jaw
2
1
3
CAUTION
To
operate
avoid
the
damage
tool
to
without
the
the
tool, do
retaining
not
pin fully inserted. Damage to the cylinder may occur.
ONE-KEY™ Indicator
Solid Blue
Blinking Blue
Blinking Red
Wireless mode is active and ready
app.
Tool is actively communicating with
the ONE-KEY™ app.
Tool is in security lockout and can
be unlocked by the owner via the
ONE-KEY™ app.
ONE-KEY™
FUNCTIONAL DESCRIPTION
1. Start button
2. Green LED
3. Red LED
4. Press jaw
5. Retaining pin
6. Release
button
2
6
7
1
8
3
5
4
9
7. Handle
8.Coin battery
door
9.ONE-KEY™
Indicator (Not
shown)
Use tool only with
MILWAUKEE
®
or
MILWAUKEE
®
approved press jaws, press
fittings, and pipe for which they are designed.
Other uses may cause injury or damage to the
tool, accessories, and pipes. Leaking may
result.
To learn more about the ONE-KEY™ functionality
for this tool, please refer to the quick reference
included with this product or go to
www.milwaukeetool.com.au/www.milwaukeetool.co
.nz. To download the ONE-KEY™ app, visit the App
Store or Google Play from your smart device.
Before beginning a press, inspect the jaw
assembly for cracks or other damage. Do not use
a damaged jaw assembly. Return damaged jaw
assembly to a
MILWAUKEE
®
service facility.
The tool will turn off automatically after 30 minutes
of no use.
If the red LED lights, press the start button. If the
tool does not run, return the tool to a
MILWAUKEE
®
service facility for repairs.
If the red and green LEDs blink alternately, the
tool must be serviced by a
MILWAUKEE
®
service
facility.