Milwaukee M18 HCC, User Manual, Page: 14 / 28

12
English 14
and insulated to prevent short circuit.
• Ensure that battery pack is secured against
movement within packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice.
MAINTENANCE
Check that the cutting jaws and the press drives move
smoothly.
Clean and grease the press drives, locking bolts and
cutting jaws when you have fi nished work.
The device contains hydraulic fl uid. Hydraulic fl uids
pose a hazard to groundwater. Uncontrolled draining
or improper disposal is punishable by law.
Service must be performed at least annually or after
5,000 cutting processes.
Service and repair work may only be carried out by
authorised specialist workshops.
Replace worn cutting tools.
The ventilation slots of the machine must be kept clear
at all times.
Use only Milwaukee accessories and Milwaukee
spare parts. Should components need to be replaced
which have not been described, please contact one of
our Milwaukee service agents.
If needed, an exploded view of the tool can be ordered.
Please state the Article No. as well as the machine
type printed on the label and order the drawing at your
local service agents.
SYMBOLS
Please read the instructions carefully before
starting the machine.
Always wear goggles when using the machine.
Danger of electric shock
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any
work on the appliance.
Keep hands away from cutting tools and
other moving parts. Fingers may get caught
in the cutting mechanism and be amputated
or injured.
Accessory - Not included in standard equipment,
available as an accessory.
Do not dispose of electric tools together with
household waste material. Electric tools and
electronic equipment that have reached the
end of their life must be collected separately
and returned to an environmentally compatible
recycling facility. Check with your local authority
or retailer for recycling advice and collection
point.