background image

WARRANTY - AUSTRALIA and NEW ZEALAND

SERVICE - AUSTRALIA and NEW ZEALAND

MILWAUKEE

® prides itself in producing a premium quality product that is Nothing But Heavy Duty

TM

.

Your satisfaction with our products is very important to us! If you encounter any problems with the
operation of this tool, please contact your authorised 

MILWAUKEE

® dealer.

For a list of 

MILWAUKEE

® dealers, guarantee or service agents please contact 

MILWAUKEE

®

Customer Service or visit our website.
(Australia Toll Free Telephone Number 1300 645 928)
(New Zealand Toll Free Telephone Number 0800 645 928) 
or visit milwaukeetool.com.au/milwaukeetool.co.nz.

Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to 
product sold in Australia and New Zealand.

Milwaukee Electric Tool Corporation

13135 West Lisbon Road, Brookfield, Wisconsin U.S.A. 53005

Milwaukee Tool (Australia)

21 Kelletts Road, Rowville, VIC 3178 

Melbourne, Australia

Milwaukee Tool (New Zealand)

274 Church Street, Penrose, 

Auckland, 1061, New Zealand

DESIGNED BY MILWAUKEE ELECTRIC TOOL CORP.

PROFESSIONALLY MADE IN CHINA

PRINTED IN CHINA

All 

W

rade 

P

arks are owned by Techtronic Cordless GP unless otherwise stated.

© 20

 Milwaukee Electric Tool Corporation.

(A)

Summary of Contents for M18 FUEL FMCS66













Reviews: