2
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
Read all safety warn-
ings and all instruc-
tions.
Failure to follow
the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
WORK AREA
SAFETY
• To reduce the risk of injury, close supervision is
necessary
when an appliance is used near children.
• Store idle light out of reach of children.
Warm lights
can become hazardous in the hands of children.
• Do not use outdoors.
ELECTRICAL
SAFETY
• Power cord
plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Un-
modified plugs and matching outlets will reduce risk
of electric shock.
•
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators.
There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose light to rain or wet conditions.
Water
entering a light will increase the risk of electric shock.
• To reduce the risk of electric shock, do not put light
in water or other liquid.
Do not place or store appli-
ance where it can fall or be pulled into a tub or sink.
•
Do not abuse the cord. Never use the cord for car
-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts.
Damaged or entangled cords increase the risk
of electric shock.
•
Do not unplug by pulling on the cord.
To unplug,
grasp the plug, not the cord.
• Unplug the cord from outlet when not in use and
before servicing or cleaning.
•
Always use a suitable extension cord to reduce the
risk of electric shock.
• If operating a light in a damp location is unavoid-
able, use a ground fault circuit interrupter (GFCI)
protected supply.
Use of an GFCI reduces the risk
of electric shock.
PERSONAL SAFETY
•
Do not overreach. Keep proper footing and balance
at all times.
This enables better control of the light in
unexpected situations.
•
Do not use on a ladder or unstable support.
Stable
footing on a solid surface enables better control of the
light in unexpected situations.
BATTERY TOOL USE
AND CARE
• Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
•
Use light only with specifically designated battery
packs.
Use of any other battery packs may create a
risk of injury and fire.
•
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
•
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac
-
cidentally occurs, flush with water. If liquid con
-
tacts eyes, additionally seek medical help.
Liquid
ejected from the battery may cause irritation or burns.
•
Do not use a battery pack or tool that is damaged or
modified.
Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or
risk of injury.
•
Do not expose a battery pack or tool to fire or ex
-
cessive temperature.
Exposure to fire or temperature
above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions.
Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your light serviced by a qualified repair per
-
son using only identical replacement parts.
This
will ensure that the safety of the light is maintained.
• Never service damaged battery packs.
Service of
battery packs should only be performed by the manu-
facturer or authorized service providers.
SPECIFIC SAFETY
RULES
•
Maintain labels and nameplates.
These carry im-
portant information. If unreadable or missing, contact
a MILWAUKEE service facility for a free replacement.
•
WARNING
Some dust created by
power sanding, saw-
ing, grinding, drilling,
and other construction activities contains chemicals
known to cause cancer, birth defects or other reproduc-
tive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
filter out microscopic particles.
SPECIFICATIONS
Cat. No. ..................................................... 2360-20
AC Input Volts
....................................................
120
DC Input Volts
......................................................
18
Max AC Input Amps
...............................................
1
Max DC Input Amps
............................................2.5
Hertz
....................................................................
60
