3
•
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another.
Shorting the battery terminals together
may cause burns or a
fi
re.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
•
Do not use a battery pack or tool that is dam-
aged or modi
fi
ed.
Damaged or modi
fi
ed batteries
may exhibit unpredictable behavior resulting in
fi
re,
explosion or risk of injury.
•
Do not expose a battery pack or tool to
fi
re or
excessive temperature.
Exposure to
fi
re or tem-
perature above 130°C (265°F) may cause explosion.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range speci
fi
ed in the instructions.
Charging
improperly or at temperatures outside the speci
fi
ed
range may damage the battery and increase the risk
of
fi
re.
SERVICE
Have your power tool serviced by a quali
fi
ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
•
Never service damaged battery packs.
Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES FOR
IMPACT WRENCH
•
Wear ear protectors when impact drilling.
Expo-
sure to noise can cause hearing loss.
Use only sockets and other accessories spe-
ci
fi
cally designed for use on impact wrenches
and drivers.
Other sockets and accessories might
shatter or break causing injury.
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
•
lead from lead-based paint
•
crystalline silica from bricks and cement and other
masonry products, and
arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
fi
lter out microscopic particles.
SYMBOLOGY
Volts
V
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
•
•
•
Maintain labels and nameplates. These carry
important information.
If unreadable or missing,
contact a
MILWAUKEE
®
service facility for a
replacement.
Read operator's manual.
•
•
•
To reduce the risk of fire, personal
injury, and product damage due to
ADDITIONAL BATTERY SAFETY RULES
WARNING
a short circuit, never immerse your tool, battery pack or
charger in fluid or allow a fluid to flow inside them.
Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or
bleach-containing products, etc., can cause a short
circuit.
SPECIFICATIONS
Cat. No. .........................M12 FIW38, M12 FIWF12
RPM ........................................................... 0 - 2700
IPM ............................................................ 0 - 3200
Volts..........................................................1 2 V DC
Battery type .................................................M12™
Charger type................................................M12™
Recommended ambient
Operating temperature .......................0°C to 52°C
FUNCTIONAL DESCRIPTION
1
2
4
3
5
7
6
1. Belt clip
2. Control switch
3. Handle
4. Trigger
5. LED
6. 3/8" Friction ring
(Cat. No. M12 FIW38)
7. 4-Mode drive control
8. 1/2" Friction ring
(Cat. No. M12 FIWF12)
Cat. No. M12 FIW38
8
Fastening torque/ Nut-busting torque.........339 Nm
Regulatory Compliance Mark (RCM).
This product meets applicable
regulatory requirements.
Do not dispose of electric tools
together with household waste
material. Electric tools and electronic
equipment that have reached the end
of their life must be collected
separately and returned to an
environmentally compatible recycling
facility.
Hold the power tool by insulated gripping
surfaces, when performing an operation where
the fastener may contact hidden wiring.
Fasteners contacting a “live” wire may make
exposed metal parts of the power tool “live” and
could give the operator an electric shock.
