background image

WARRANTY - AUSTRALIA and NEW ZEALAND

SERVICE - AUSTRALIA and NEW ZEALAND

961013367-01(A)

Milwaukee Electric Tool Corporation

13135 West Lisbon Road, Brookfield, Wisconsin U.S.A. 53005

Milwaukee Tool (Australia)

Melbourne, Australia

21 Kelletts Road, Rowville, VIC 3178 

Please refer to Australian and New Zealand warranty supplied with tool. This warranty applies only to 
product sold in Australia and New Zealand.

MILWAUKEE

®prides itself in producing a premium quality product that is Nothing But Heavy Duty®. 

Your satisfaction with our products is very important to us! If you encounter any problems with the
operation of this tool, please contact your authorised 

MILWAUKEE

® dealer.

For a list of 

MILWAUKEE

® dealers, guarantee or service agents please contact 

MILWAUKEE

®

Customer Service or visit our website.
(Australia Toll Free Telephone Number 1300 645 928)
(New Zealand Toll Free Telephone Number 0800 645 928) 
or visit milwaukeetool.com.au/milwaukeetool.co.nz.

Milwaukee Tool (New Zealand)

274 Church Street, Penrose, 

Auckland, 1061, New Zealand

Designed by Milwaukee Electric Tool Corp.

Professionally Made in China for Milwaukee Tool (Australia) / Milwaukee Tool (New Zealand)

Printed in China

Summary of Contents for M12 FUEL FDGA









Reviews: