background image

10

11

 

L4 HLVIS

...................................8 W

...................................4 h

...................................4 h

...................................8 h

.................................20 h

...................................2 h

...............................400 lm

...............................400 lm

...............................150 lm

.................................25 lm

...............................600 lm

...............................120 min

.................................80 

.............................4000 K

...................................4 V

...... 5 V DC; 0,1 A – 2,1 A

...............................235 g

........................... IP 53

...................... -18...+50 °C

....................... +5...+40 °C

...........................L4 B2

...........................CUSB

ENGLISH

ENGLISH

TECHNICAL DATA 

BATTERY-LAMP

Rated Power input .............................................................................

Lighting time with one fully charged battery

  Spot Mode High..............................................................................

  Flood Mode High ............................................................................

  Flood Mode Med ............................................................................

  Flood Mode Low .............................................................................

  Hybrid Mode ...................................................................................

Luminus fl ux

  Spot Mode High..............................................................................

  Flood Mode High ............................................................................

  Flood Mode Med ............................................................................

  Flood Mode Low .............................................................................

  Hybrid Mode ...................................................................................

Charging time ....................................................................................

Colour rendering index (CRI).............................................................

Colour temperature............................................................................

Battery voltage...................................................................................

USB-input ..........................................................................................

Weight (luminaire with Battery) ..........................................................

Protection class .................................................................................

Recommended ambient operating temperature ................................

Recommended ambient charging temperature .................................

Recommended Battery ......................................................................

Recommemded USB power supply...................................................

The indicator light will display the charging status: 
Red fl ashing: charging, 0-25% charged
Orange fl ashing: charging 25-80% charged 
Green fl ashing: charging, 80-99% charged 
Green solid: 99-100% charged
Red/Green fl ashing: damaged or faulty battery
If the light indicator fl ashes red and green, check that the battery is 

fully seated into the bay. Remove the battery and reinsert. If the 

light continues to fl ash red and green, the battery may be 

extremely hot or cold, or wet. Allow the battery to cool down, warm 

up, or dry out and then reinsert. If the problem persists, contact a 

MILWAUKEE service facility.

FUEL GAUGE

The fuel gauge will display the battery life:
Red fl ashing: 0-10% remaining  
Red solid: 10-25% remaining  
Orange solid: 25-80% remaining  
Green solid: 80-100% remaining

BATTERIES

Battery packs which have not been used for some time should be 

recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance 

of the battery pack. Avoid extended exposure to heat or sunshine 

(risk of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully 

charged, after used. 
To obtain the longest possible battery life remove the battery pack 

from the charger once it is fully charged.
For battery pack storage longer than 30 days:

Store the battery pack where the temperature is below 27°C and 

away from moisture

Store the battery packs in a 30% - 50% charged condition

Every six months of storage, charge the pack as normal.

TRANSPORTING LITHIUM BATTERIES

Lithium-ion batteries are subject to the Dangerous Goods 

Legislation requirements.
Transportation of those batteries has to be done in accordance 

with local, national and international provisions and regulations.

 WARNING Read all safety warnings, instructions, 

illustrations and specifi cations provided with this power tool. 

Failure to follow all instructions listed below may result in electric 

shock, fi re and/or serious injury.

Save all warnings and instructions for future reference.

 

SAFETY INSTRUCTIONS BATTERY-LAMP

Warning: 

Do not direct the light beam at persons or animals and 

do not stare into the light beam yourself (not even from a distance). 

Staring into the light beam may result in serious injury or vision 

loss. 
Don‘t use this tool in wet areas .
The light source of this luminaire is not replaceable; when the light 

source reaches its end of life the whole luminaire shall be replaced.

 

SAFETY INSTRUCTIONS BATTERY

Only use Milwaukee Type L4B2 rechargeable batteries.
Remove the battery pack before starting any work on the 

appliance.
Do not dispose of used battery packs in the household refuse or by 

burning them. Milwaukee Distributors off er to retrieve old batteries 

to protect our environment.
Do not store the battery pack together with metal objects (short 

circuit risk).
Battery acid may leak from damaged batteries under extreme load 

or extreme temperatures. In case of contact with battery acid wash 

it off  immediately with soap and water. In case of eye contact rinse 

thoroughly for at least 10 minutes and immediately seek medical 

attention.

Warning! 

To reduce the risk of fi re, personal injury, and product 

damage due to a short circuit, never immerse your tool, battery 

pack or charger in fl uid or allow a fl uid to fl ow inside them. 

Corrosive or conductive fl uids, such as seawater, certain industrial 

chemicals, and bleach or bleach containing products, etc., can 

cause a short circuit.

SPECIFIED CONDITIONS OF USE

The hart head light is intended to be used light independent use 

away from mains supply. The hart head light is especially designed 

for hard hat head mounting.
Do not use this product in any other way as stated for normal use.

CHARGING

Plug your USB cable into a power source such as an AC wall 

adaptor, computer or car port.

•  The user can transport the batteries by road without further 

requirements.

•  Commercial transport of Lithium-Ion batteries by third parties is 

subject to Dangerous Goods regulations. Transport preparation 

and transport are exclusively to be carried out by appropriately 

trained persons and the process has to be accompanied by 

corresponding experts.

When transporting batteries:
•  Ensure that battery contact terminals are protected and insulated 

to prevent short circuit.

•  Ensure that battery pack is secured against movement within 

packaging.

•  Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice

MAINTENANCE

The light source of this luminaire is not replaceable; when the light 

source reaches its end of life the whole luminaire shall be replaced.
Use only Milwaukee accessories and spare parts. Should 

components need to be replaced which have not been described, 

please contact one of our Milwaukee service agents (see our list of 

guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please 

state the machine type printed as well as the six-digit No. on the 

label and order the drawing at your local service agents or directly 

at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 

71364 Winnenden, Germany.

SYMBOLS

CAUTION! WARNING! DANGER!

Please read the instructions carefully before 

starting the machine.

Do not stare at the operating light source.

Class III electrical protection.

This tool is only suitable for indoor use. Never 

expose tool to rain.

Do not dispose electric tools, batteries/

rechargeable batteries together with household 

waste material.

Electric tools and batteries that have reached the 

end of their life must be collected separately and 

returned to an environmentally compatible 

recycling facility.

Check with your local authority or retailer for 

recycling advice and collection point.
European Conformity Mark

British Confomity Mark

Ukraine Conformity Mark

EurAsian Conformity Mark

Reviews: