Milwaukee K?500?ST, Operating Instructions Manual

Page: 11 / 16

5
GB
English
WARNING! Read all safety warnings and all instruc-
tions, including those given in the accompanying brochure.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY INSTRUCTIONS
Wear ear protectors.
Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool.
Loss of
control can cause personal injury.
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord. Cutting accessory
contacting a „live“ wire may make exposed metal parts of the power
tool „live“ and could give the operator an electric shock.
Appliances used at many different locations including open air should
be connected via a residual current device (FI, RCD, PRCD) of 30mA
or less.
Always wear goggles when using the machine. It is recommended to
wear gloves, sturdy non slipping shoes and apron.
Sawdust and splinters must not be removed while the machine is
running.
Before doing any work on the machine, pull the plug out of the
socket.
Only plug-in when machine is switched off.
Keep mains lead clear from working range of the machine. Always
lead the cable away behind you.
When working in walls ceiling, or floor, take care to avoid electric
cables and gas or waterpipes.
The dust produced when using this tool may be harmful to health.
TECHNICAL DATA
Chipping Hammer
K 500 ST
220-240 V
K 500 ST
110-120 V
Production code 4431 81 01...
4439 21 01...
... 000001-999999
4433 46 01...
... 000001-999999
Rated input 1100 W 1100 W
Output 550 W 550 W
Rate of percussion under load max. 3000 min
-1
3000 min
-1
Impact energy per stroke according to EPTA-Procedure 05/2009 7,5 J 7,5 J
Chuck neck diameter 66 mm 66 mm
Weight according EPTA-Procedure 01/2003 5,9 kg 5,9 kg
Noise information
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K =3dB(A))
Sound power level (Uncertainty K =3dB(A))
90,0 dB (A)
101,0 dB (A)
89,5 dB (A)
100,5 dB (A)
Measured values determined according to 2000/14/EC at the user’s ear.
2000/14/EC: Conformity assessment procedure according to Annex VI.
Notified Body: SLG Prüf- und Zertifizierungs GmbH
Burgstädter Straße 20, 09232 Hartmannsdorf, Germany
Measured sound power level
Guaranteed sound power level
Wear ear protectors!
98,6 dB (A)
101 dB (A)
98,6 dB (A)
101 dB (A)
Vibration information
Total vibration values (vector sum in the three axes) determined according to EN 60745.
Vibration emission value a
h
Chiselling:
Uncertainty K =
16,7 m/s
2
1,5 m/s
2
15,4 m/s
2
1,5 m/s
2
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with
different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is running
but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
425_062_K500ST_1-2.indd 5 24.04.13 11:35
Hold power tool by insulated gripping surfaces, when
performing an operation where the chipping/demolishing
accessory bit may contact hidden wiring or its own cord. The
accessory bit contacting a „live“ wire may make exposed metal parts of
the power tool „live“ and could give the operator an electric shock.
Sawdust, splinters or obstructions must not be removed while the
machine is running.
Before doing any work on the machine, disconnect the power cord
from the supply source.
Wear ear protection.