![background image](http://html1.mh-extra.com/html/milwaukee/jspe-90-x/jspe-90-x_instructions-for-use-manual_1799273005.webp)
4
ENGLISH
JSPE 90 X
When working on delicate surfaces please
use the plastic protection shoe.
Fit the plastic protection shoe to the front
of the base plate (as illustrated) and fix the
lugs with the back of the base plate.
Bend up both lugs and remove the plastic
protection shoe.
The anti-splintering device almost entirely
prevents the edge of the wood from
splintering.
Place the anti-splintering device as shown
in the illustration with the smooth side
downwards and flush with the base plate
(this is only possible with the base plate in
the forward position).
The stroke-rate (= movements per minute
of the saw blade) can be infinitely varied
by means of the adjustment wheel.
The letters A to G are printed on the speed
control, meaning:
A = lowest stroke rate
G = highest stroke rate
The stroke rate appropriate to the
material being worked on can be taken from the following table, and the
corresponding letter shown on the setting wheel.
Material
Stroke rate
Wood
G
Steel
E–G
Aluminium
E–F
Rubber
A–C
Under the effect of extreme electromagnetic interferences from the outside,
tempo–rary variations in the speed of rotation could arise in particular cases.
Switching on:
Push the sliding switch forward.
Switching off:
Depress the protruding end of the sliding
switch. The switch moves back to position
“0”.
Plastic protection
shoe
Assembly
Dismantling
Anti–splintering
device
Adjusting the
stroke rate
Switching the
machine on and
off
15
20
25
30
3
2
1
0