16
X
English
TECHNICAL DATA
Cordless Angle Grinder
M18 FHSAG125XB
M18 FHSAG150XB
Production code
469 710 02 ...
... 000001-999999
469 733 02 ...
... 000001-999999
Battery voltage
18 V
18 V
Rated speed
9000 min
-1
9000 min
-1
D= Grinding disc diameter max.
d= Grinding disc hole diameter
125 mm
22,2 mm
150 mm
22,2 mm
b= Cutting disc thickness min. / max.
1 / 3 mm
1 / 3 mm
b= Grinding disc thickness max.
6 mm
6 mm
D= Sanding disc diameter max.
125 mm
150 mm
D= Wiring brush diameter max.
100 mm
100 mm
Thread of work spindle
M 14
M 14
Weight according EPTA-Procedure 01/2014 (Li-Ion 2,0 Ah...5,5 Ah...12,0 Ah)
2,8 kg...3,4 kg...3,9 kg
2,9 kg...3,5 kg...4,0 kg
Recommended Ambient Operating Temperature
-18°C ... +50°C
-18°C ... +50°C
Recommended battery types
M18B...
M18HB...
M18B...
M18HB...
Recommended charger
M12-18
M1418
M12-18
M1418
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))
82,98 dB(A)
82,98 dB(A)
Sound power level (Uncertainty K=3dB(A))
Wear ear protectors!
93,98 dB(A)
93,98 dB(A)
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Surface grinding (Li-Ion 1,5 Ah): Vibration emission value a
h,AG
Uncertainty K=
6,57 m/s
2
1,5 m/s
2
9,7 m/s
2
1,5 m/s
2
Disc sanding (Li-Ion 1,5 Ah): Vibration emission value a
h,DS
Uncertainty K=
2,27 m/s
2
1,5 m/s
2
1,96 m/s
2
1,5 m/s
2
For other applications, e.g. Abrasive Cutting-Off Operations or Wire Brushing other vibration values could occur.
WARNING for Vibration!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING!
Read all safety warnings and all instructions.
Failure to
follow the warnings and instructions may result in electric shock,
fire and/or serious injury.
Save all warnings and instructions for future reference.
Summary of Contents for 4933471075
