Milwaukee 4933451392, Original Instructions Manual

Page: 9 / 11

16 17
М18 HSAL
..................................... 2,25 h
..................................... 4,25 h
.......................................... 8 h
.................................... 3000 lm
.................................... 1700 lm
...................................... 900 lm
........................................ 80
.................................... 4000 K
........................................ 18 V
...............................100-240 V
.......................................110 W
........................................ 18 V
.......................................... 3 A
........................................ 80 min
...................................... 100 min
...................................... 160 min
....................................... 9,2 kg
....................................... 9,5 kg
....................................... 9,9 kg
..................................... 10,3 kg
.....................................IP34
TECHNICAL DATA BATTERY-LAMP
Lightning time with one fully charged battery (5.0 Ah)
High Level ....................................................................................................................
Med Level .....................................................................................................................
Low Level .....................................................................................................................
Luminous fl ux
High Level ....................................................................................................................
Med Level .....................................................................................................................
Low Level .....................................................................................................................
Colour rendering index (CRI)............................................................................................
Colour temperature...........................................................................................................
Battery voltage..................................................................................................................
AC input ............................................................................................................................
Charger rated power input ................................................................................................
Charger output..................................................................................................................
Quick charge current ........................................................................................................
Battery charging time with 5.0 Ah .....................................................................................
Battery charging time with 6.0 Ah .....................................................................................
Battery charging time with 9.0 Ah .....................................................................................
Weight without battery ......................................................................................................
Weight according EPTA-Procedure 01/2014 (2.0 Ah) ......................................................
Weight according EPTA-Procedure 01/2014 (5.0 Ah) ......................................................
Weight according EPTA-Procedure 01/2014 (9.0 Ah) ......................................................
Protection class ................................................................................................................
unless they have been given instructions
concerning the safe use of the appliance
by a person legally responsible for their
safety. They should be supervised whilst
using the appliance. Children shall not
use, clean or play with this appliance,
which when not in use should be secured
out of their reach.
Warning! To reduce the risk of fi re, personal injury, and product
damage due to a short circuit, never immerse your tool, battery pack or
charger in fl uid or allow a fl uid to fl ow inside them. Corrosive or
conductive fl uids, such as seawater, certain industrial chemicals, and
bleach or bleach containing products, etc., can cause a short circuit.
ADDITIONAL SAFETY INSTRUCTIONS
Remove the battery pack before starting any work on the appliance.
Do not dispose of used battery packs in the household refuse or by
burning them. Milwaukee Distributors off er to retrieve old batteries to
protect our environment.
Do not store the battery pack together with metal objects (short circuit
risk).
Use only compatible Milwaukee chargers from the same battery
platform for charging battery packs. Do not use battery packs from
other systems.
Battery acid may leak from damaged batteries under extreme load or
extreme temperatures. In case of contact with battery acid wash it off
immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
Warning! To reduce the risk of fi re, personal injury, and product
damage due to a short circuit, never immerse your tool, battery pack or
charger in fl uid or allow a fl uid to fl ow inside them. Corrosive or
conductive fl uids, such as seawater, certain industrial chemicals, and
bleach or bleach containing products, etc., can cause a short circuit.
SPECIFIED CONDITIONS OF USE
The area light is intendend to be used light independent use away from
mains supply.
Additionally the charger can charge the specifi ed Milwaukee battery
packs.
Do not use this product in any other way as stated for normal use.
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
BATTERY LAMP SAFETY INSTRUCTIONS
Warning: Do not direct the light beam at persons or animals and do
not stare into the light beam yourself (not even from a distance).
Staring into the light beam may result in serious injury or vision loss.
Caution – this product is provided with cooling openings in the bottom
enclosure. Only install this luminaire on a surface that will not allow
accumulation of water into the housing. Keep the product away from
puddles,etc.
CHARGER SAFETY INSTRUCTIONS
Do not store the battery pack together with metal objects (short circuit
risk).
Battery Cat. No. DC Volts Capacity Cell No.
M18B 18 ≤ 1.5 Ah 5
M18BX 18 ≤ 3.0 Ah 2 x 5
M18B2 18 ≤ 2.0 Ah 5
M18B4 18 ≤ 4.0 Ah 2 x 5
M18B5 18 ≤ 5.0 Ah 2 x 5
M18B6 18 ≤ 6.0 Ah 2 x 5
M18B9 18 ≤ 9.0 Ah 3 x 5
Do not try to charge non-rechargeable batteries with this charger.
No metal parts must be allowed to enter the battery section of the
charger (short circuit risk).
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
Do not touch the tool with conducting objects.
Never charge a damaged battery pack. Replace by a new one.
Before use check machine, cable, and plug for any damages or
material fatigue. Repairs should only be carried out by authorised
Service Agents.
This appliance is not intended to be used
or cleaned by persons with reduced
physical, sensory or mental capabilities,
or lack of experience or knowledge,
ENGLISH ENGLISH
CHARGING
After inserting the battery into the reception of the charger the battery
will automatically be charged (red lamp is illuminated continuously)
When a hot or cold battery pack is inserted into the charger (fl ashing
red lamp), charging will begin automatically once the battery reaches
the correct charging temperature (0°C...60°C).
Charging time varies depending on the battery temperature, charge
needed and the type of battery pack being charged.
As soon as charging is completed, the charger switches over to
”trickle” charge to maintain the full capacity (green control lamp is
illuminated continuously, red lamp off )
If both LEDs fl ash at the same time, either the battery has not been
completely mounted or there is a fault in the battery or the charger. For
safety reasons you must stop using the charger and battery
immediately and have them inspected by an Milwaukee Customer
Service Centre.
BATTERIES
Battery packs which have not been used for some time should be
recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of
the battery pack. Avoid extended exposure to heat or sunshine (risk of
overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged,
after used.
To obtain the longest possible battery life remove the battery pack from
the charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away
from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with
local, national and international provisions and regulations.
• The user can transport the batteries by road without further
requirements.
• Commercial transport of Lithium-Ion batteries by third parties is
subject to Dangerous Goods regulations. Transport preparation and
transport are exclusively to be carried out by appropriately trained
persons and the process has to be accompanied by corresponding
experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and insulated to
prevent short circuit.
• Ensure that battery pack is secured against movement within
packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
MAINTENANCE
The light source of this luminaire is not replaceable; when the light
source reaches its end of life the whole luminaire shall be replaced.
Use only Milwaukee accessories and spare parts. Should components
need to be replaced which have not been described, please contact
one of our Milwaukee service agents (see our list of guarantee/service
addresses).
If needed, an exploded view of the tool can be ordered. Please state
the machine type printed as well as the six-digit No. on the label and
order the drawing at your local service agents or directly at: Techtronic
Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
CAUTION! WARNING! DANGER!
Always disconnect the plug from the socket before carrying out any
work on the machine.
CAUTION: Possibly hazardous optical radiation emitted from this
product. Do not stare at operating lamp. May be harmful to the eye.
Please read the instructions carefully before starting the machine.
Do not dispose electric tools, batteries/rechargeable
batteries together with household waste material.
Electric tools and batteries that have reached the end
of their life must be collected separately and returned
to an environmentally compatible recycling facility.
Check with your local authority or retailer for recycling
advice and collection point.
Class II tool.
Tool in which protection against electric shock does not rely on basic
insulation only, but in which additional safety precautions, such as
double insulation or reinforced insulation, are provided.
There being no provision for protective earthing or reliance upon
installation conditions.
Do not burn used battery packs.
Never charge a damaged battery pack. Replace by a new one.
T3.15A
Time-lag fuse 3.15 A
European Conformity Mark
British Confomity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark