background image

OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR

TO  REDUCE  THE  RISK  OF  INJURY,  USER  MUST  READ  AND  UNDERSTAND

OPERATOR'S  MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN

COMPRENDRE  LE  MANUEL  DE  L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER

EL  MANUAL  DEL  OPERADOR.

14.4  V  AND  18  V  LOK-TOR  1/2"  HAMMER-DRILLS  &  DRIVER  DRILLS

PERCEUSE  À  PERCUSSION  ET  PERCEUSE-VISSEUSE  DE  14,4  V    ET

18  V  13  mm  (1/2")  LOK-TOR

TALADRO  DE  PERCUSIÓN  Y  TALADRO  ATORNILLADOR  DE  13  mm

(1/2") LOK-TOR Y 14,4 V Y 18 V

0613-20 Lok-Tor Hammer-Drill

0614-20 Lok-Tor Hammer-Drill

0616-20 Lok-Tor Driver Drill

0622-20 Lok-Tor Driver Drill

0624-20 Lok-Tor Hammer-Drill

Catalog No.

No de Cat.

Catálogo No.

To  extend  battery  pack  life:

• Follow the "BATTERY PACK CARE AND USE" section of

this manual.

• Charge battery packs before use.

• Follow the charging instructions in your charger manual.

Pour étendre la durée de vie de la batterie:

• Suivre les instructions de la section «UTILISATION ET

ENTRETIEN DE LA BATTERIE» de ce manuel.

• Charger les batteries avant de les utiliser.

• Suivre les instructions de charge du manuel du chargeur.

Para  extender  la  duración  de  la  batería:

• Seguir la sección “USO Y CUIDADO DE LA BATERÍA” en

este manual.

• Cargar las baterías antes de usarlas.

• Seguir las instrucciones de carga en el manual del cargador.

Summary of Contents for 0613-20











Reviews: