![background image](http://html1.mh-extra.com/html/milwaukee/0235-21/0235-21_operators-manual_1797928002.webp)
3
2
1.
Hold power tools by insulated grip-
ping surfaces when performing an
operation where the cutting tool
may contact hidden wiring or its
own cord.
Contact with a “live” wire
will make exposed metal parts of the
tool “live” and shock the operator.
2.
Use auxiliary handles supplied
with the tool.
Loss of control can
cause personal injury.
3.
Wear ear protectors with impact
drills.
Exposure to noise can cause
hearing loss.
4.
Maintain labels and nameplates.
These carry important information. If un-
readable or missing, contact a
MILWAU-
KEE
service facility for a free replace-
ment.
5.
WARNING!
Some dust created by power
sanding, sawing, grinding, drilling, and
other construction activities contains
chemicals known to cause cancer, birth
defects or other reproductive harm.
Some examples of these chemicals are:
•
lead from lead-based paint
•
crystalline silica from bricks and ce-
ment and other masonry products, and
•
arsenic and chromium from chemi-
cally-treated lumber.
Your risk from these exposures varies,
depending on how often you do this
type of work. To reduce your exposure
to these chemicals: work in a well ven-
tilated area, and work with approved
safety equipment, such as those dust
masks that are specifically designed to
filter out microscopic particles.
SPECIFIC SAFETY RULES
POWER TOOL USE AND CARE
16.
Do not force the power tool. Use
the correct power tool for your ap-
plication.
The correct power tool will
do the job better and safer at the rate
for which it was designed.
17.
Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
18.
Disconnect the plug from the
power source and/or the battery
pack from the power tool before
making any adjustments, chang-
ing accessories, or storing power
tools.
Such preventive safety mea-
sures reduce the risk of starting the
tool accidentally.
19.
Store idle power tools out of the
reach of children and do not al-
low persons unfamiliar with the
power tools or these instructions
to operate power tools.
Power
tools are dangerous in the hands of
untrained users.
20.
Maintain power tools. Check for
misalignment or binding of mov-
ing parts, breakage of parts and
any other condition that may af-
fect the power tool's operation. If
damaged, have the power tool
repaired before use.
Many acci-
dents are caused by poorly maintained
power tools.
21.
Keep cutting tools sharp and
clean.
Properly maintained cutting
tools with sharp cutting edges are less
likely to bind and are easier to control.
22.
Use the power tool, accessories
and tool bits etc., in accordance
with these instructions and in the
manner intended for the particu-
lar type of power tool, taking into
account the working conditions
and the work to be performed.
Use
SERVICE
23.
Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of the
power tool is maintained.
WORK AREA SAFETY
ELECTRICAL SAFETY
PERSONAL SAFETY
WARNING!
READ ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in electric shock, fire
and/or serious injury. The term "power tool" in all of the warnings listed
below refers to your mains-operated (corded) power tool or battery-
opearted (cordless) power tool.
SAVE THESE INSTRUCTIONS
GENERAL SAFETY RULES-FOR ALL POWER TOOLS
1.
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2.
Do not operate power tools in ex-
plosive atmospheres, such as in
the presence of flammable liq-
uids, gases, or dust.
Power tools
create sparks which may ignite the dust
or fumes.
3.
Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose
control.
4.
Power tool plugs must match the
outlet. Never modify the plug in any
way. Do not use any adapter plugs
with earthed (grounded) power
tools.
Unmodified plugs and matching
outlets will reduce risk of electric shock.
5.
Avoid body contact with earthed
or grounded surfaces such as
pipes, radiators, ranges and re-
frigerators.
There is an increased
risk of electric shock if your body is
earthed or grounded.
6.
Do not expose power tools to rain
or wet conditions.
Water entering a
power tool will increase the risk of
electric shock.
7.
Do not abuse the cord. Never use
the cord for carrying, pulling, or
unplugging the power tool. Keep
cord away from heat, oil, sharp
edges, or moving parts.
Damaged
or entangled cords increase the risk of
electric shock.
9.
Stay alert, watch what you are do-
ing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, al-
cohol or medication.
A moment of
inattention while operating power tools
may result in serious personal injury.
10.
Use safety equipment. Always
wear eye protection.
Safety equip-
ment such as dust mask, non-skid
safety shoes, hard hat, or hearing pro-
tection used for appropriate conditions
will reduce personal injuries.
11.
Avoid accidental starting. Ensure
the switch is in the off-position
before plugging in.
Carrying tools
with your finger on the switch or plug-
ging in power tools that have the
switch on invites accidents.
12.
Remove any adjusting key or
wrench before turning the power
tool on.
A wrench or a key left at-
tached to a rotating part of the power
tool may result in personal injury.
13.
Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
14.
Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts.
Loose clothes,
8.
When operating a power tool out-
doors, use an extension cord suit-
able for outdoor use.
Use of a cord
suitable for outdoor use reduces the
risk of electric shock.
jewellery, or long hair can be caught in
moving parts.
15.
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of these devices can reduce dust-
related hazards.
of the power tool for operations differ-
ent from those intended could result in
a hazardous situation.