MILUX MVC-8200, Instruction Manual

Page: 5 / 6

4

Crevice Nozzle
Useful for cleaning radiators, crevices, corners, baseboards and between cushions.

Upholstery
Useful for cleaning furniture and upholstery.
Care and Cleaning
Replacing the Dust Bag

The dust bag will need to be cleaned or replaced when the dust full indicator shows RED or when
there is a drop in the suction power.
Warning: To reduce the risk of electric shock, the power cord must be disconnected before changing
the dust bag or performing maintenance/troubleshooting checks.

Press the button on the front of the vacuum cleaner to open the vacuum lid and lift out the dirt dust
bag.
Note: Vacuuming new carpet or carpet with fine powders may clog the dust bag, so inspect the bag
frequently. Never operate without dust bag in place.

To clean the cloth bag, slide out the plastic holder at the end of the bag. Dust the bag gently against a
bin or plastic bag. Wash the bag and dry. After drying, insert plastic holder back into bag opening and
replaced to the vacuum.

For paper dust-filter bag just throw it away and replaced with a new one.

Close the storage compartment cover.
Warning: Before closing the main unit, ensure the dust bag is well positioned inside the compartment
and does not get caught between the hinges when closing the cover.
Cleaning the Pre-motor Filter

The pre-motor filter is located inside the storage compartment behind the dust bag.

Lift up the vacuum cleaner lid and pull out the pre-motor filter.

The pre-motor filter can be rinsed in warm water. Allow to air dry for 24 hours before replacing.
Cleaning the Post-motor Filter

The post-motor filter is located on the back of the vacuum cleaner.

Release the post-motor filter by pressing down the catches at the top of the cover.

The pre-motor filter can be rinsed in warm water. Allow to air dry for 24 hours before replacing