7
Maintenance
Due to fan’s natural movement, connections may get loose after a period of usage.
To ensure a proper and safety usage,We highly recommend to inspect and tighten all connections
every 6 months.
CLEANING
Clean your fan periodically to prolong its new appearance. Basic cleaning procedures are as follows:
1.Use only lukewarm water. Do not use detergent, corrosive or acidic solution.
2.Damp the cloth lightly. Use only soft or lint-free cloth to clean the fan. Rough fabric will
scratch the surface.
3.Apply a thin coat of furniture polish to the wooden blades to protect and enhance the appearance.
4.To cover small scratches, apply a light coat of shoe polish over it.
5.There is no need to lubricate the fan.
Troubleshooting
Check on the following before lodging a service report
SYMPTOM PROBLEM SOLUTION
Fan not moving 1.Main cables not connected 1.Check main and branch circuit
Breakers or fuse
2.Wire connection loose 2.Check the line wires connections
to the fan and switch housing
Fan noisy 1.Housing screws are loose 1.Tighten all screws
2.Wire and nut connections 2.Neatly separate and store the wire
rattles against each other connections from the nut
3.Canopy touches the ceiling 3.Check to ensure the canopy is not
touching or too close to the
Ceiling
Remote control 1.Remote and receiver code 1.Check that the codes are exactly
Not working different the same
2.Battery not installed 2.Install the remote control battery
3.Weak battery 3.Change a new battery
