background image

1

1.Installation must be carried out by a qualified wiring installer.

2. Before Installing the fan

 

turn off the power supply.

3.Use power supply 220-240V/50Hz.

4.When mounting the fan,ensure that the safety cable is loop across the ceiling 

    mounting hook.

5.The ceiling mounting hook must be able to withhold a min of 35 pounds.

7.Do not place any objects in the path of the blades.

8.When all electrical connection are done,store all wire neatly.

9.Make sure that all screws and connection are tightly screwed and secured.

10.An all

pole disconnection must be incorporated in the fixed wiring in accordance 

    with the wiring rules, a all

pole disconnection incorporated in the fixed wiring is to 

     be provided.

11.This appliance can be used by children aged from 8 years and above and persons with reduced 

physical, sensory or mental capabilities or lack of experience and knowledge if they have been given 

supervision or instruction concerning use of the appliance in a safe way and understand the hazards

involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be 

made by children without supervision.

Safety Precaution

Summary of Contents for MCF- E120










Reviews: